SODAQ ExpLoRer

$99.99

SODAQ’s brand new ExpLoRer board that they designed for Microchip.

SKU: sodaq-lora-explorer Categories: , ,

Description

Overview:

This is SODAQ’s brand new ExpLoRer board that we designed for Microchip. Please visit their SODAQ Support page to see the schematics and how to get started with the new ExpLoRer. By clicking here, you will be redirected to the page.

Features:

  • Atmel SAMD21, 32 bits Arm Cortex M0 microcontroller
  • Microchip RN2903A LoRa module
  • Microchip RN4871 Bluetooth 4.2 module (BLE) with ceramic antenna
  • Atmel ATECC508A1 crypto chip to securely store your LoRa keys.
  • Atmel SST25PF040C serial flash chip (4Mbit)
  • MCP 73831 Charge controller and on-board rechargeable coin cell battery
  • embedded (PCB) LoRa antenna
  • MCP97001 temperature sensor
  • RGB LED
  • Micro USB Connector

 Specifications:

Microcontroller ATSAMD21J18, 32-Bit ARM Cortex M0+
CompatibilityArduino M0 Compatible
Size93 x 55 mm
Operating Voltage3.3V
I/O Pins20
Analog Output Pin10-bit DAC
External InterruptsAvailable on all pins
DC Current per I/O pin7 mA
Flash Memory256 KB and  4MB (external flash)
SRAM32KB
EEPROMUp to 16KB by emulation
Clock Speed48 MHz
Power5V USB power and/or 3.7 LiPo battery
ChargingSolar charge controller, up to 500mA charge current
LEDRGB LED, Blue LED
LoRaMicrochip RN2903A Module
BluetoothMicrochip RN4871 Module
CyptochipATECC508A
Temperature sensorMCP9700AT
USBMicroUSB Port

Intended use
The ExpLoRer is a development/evaluation tool intended for the evaluation of Microchip wireless modules in a Research and Development laboratory environment. It is not a Finished Appliance. Manufacturers who integrate ExpLoRer in a Finished Appliance product must take responsibility to follow regulatory guidelines, for example for CE marking and EC compliance.